Genius Camp [Master]

Backcountry IV - Process

Laurel Sullivan and 6 OthersSydney Brown
Devin Lewtan
Oliver Geller
Max Dadagian
Jordana Conti
Andrew Todd Marcus
1 / 26

Many people have careers that place them on the brink of life and death. While there are many technologies out there to help people who are placed in those situations, there are still many advancements that need to be made. For the brainstorming process, we brainstormed many different scenarios and careers that place people on the brink of life. Among these careers are deep sea divers, firefighters, high altitude mountaineers, and back-country skiers. People who take part in these activities experience hypothermia, low oxygen levels, and frostbite, among other issues. While doing research on hypothermia we found that one of the first things that doctors do to treat hypothermia is give them a heated IV. This heated IV allows the patient to raise their body temperature, easing them out of hypothermia. Our group thought that creating a portable heated IV would be great for people who are experiencing hypothermia while high altitude climbing, and once treated with this IV, they will be healthy enough to summit the mountain to seek medical help.

Originally, we were going to have IV bags that people would carry in their packs. After thinking about that for awhile, we realized that carrying an IV bag would add a bunch of extra weight to a backpack. Most high altitude climbers use Nalgenes, so we decided to use the water from our Nalgene for the IV. The water in the Nalgene will be purified by UV lights. Additionally, in the compartment there will be a salt tab that will mix with the water to create the saline solution that is normally found in an IV bag.

The first iteration of the portable heated IV screwed onto the top of the water bottle. This cap was comprised of 6 holes for the UV lights, with a hole in the middle for the IV. We liked the shape of the compartment, and it screwed on and off of the Nalgene cap easily, so we continued off that idea for our next iteration. However, the piece wasn’t long enough, so we decided to lengthen it. We knew before creating the piece that it would not hold the cuff and the necessary technology involved in our piece, but we created it to test the shape and idea.

In our second iteration, we redesigned the cylinder so that it actually had two compartments that would screw together. Though there were two compartments, there would be a small piece in between the two that would screw them together, so that they remained the same diameter and size. We designed the piece to fit exactly between the two compartments so that it wouldn’t be visible when the entire piece was together. The part had triangular shaped spaces cutting through it where the IV tube and wires for the technology side of our studio fit. In the upper cylinder, the holes remained for the UV lights, but there was more space underneath for the Arduino. In the bottom compartment, we created a hole in the middle designed to fit the IV reservoir and tubing, and small spaces directly next to the reservoir where the resistors to warm the reservoir sat. This spacing for the pieces worked well, except that the entire reservoir piece took up too much room, so much that all of the compartments didn’t screw together. Underneath the inner part designed to hold the reservoir and resistors, there was room underneath to hold the arm cuff and the excess tubing. We also designed two caps to close together the whole piece. Except for the fact that it was a bit sharp and there some minor fitting issues, the caps worked well and made the entire piece compact and portable. For the next iteration, which was the final one, we made a few critical changes.

    The next iteration was the design of the arm cuff. The purpose of the arm cuff is to hold and stabilize the needle, making it easier to slide and secure in the user’s arm. However, the cuff couldn’t be too big, because otherwise it wouldn’t fit in our bottom compartment, defeating the purpose of keeping all the pieces in one place. On Fusion, we created the piece so that it rounded to sit on the user’s forearm comfortably. There were two cutouts on the ends to connect with the Velcro strapping that would allow for adjustability and security. The top of the cuff had a track allowing the needle holder to run back and forth. The needle holder was just a semi circle piece, with the length across being the diameter of the needle holder on the tubing, so that the needle holder would just pop into place on the cuff. There were a few issues with the piece, though. The two cutouts on the ends were thin, so they weren’t strong enough to hold the strapping - one of the pieces actually broke. Another problem was the semi circle needle holder on the cuff didn’t hold the actual casing around the needle, so it fit it but didn’t keep it in place. Also, the body of the cuff wasn’t long enough to fit comfortably. For our final iteration, we had to change these issues.

The final iteration of the container is pretty similar to the previous, we only changed a few things. The major change that we made was to the canister. We moved the IV holder to the side so that the tube and electronics can go out the side instead of through the middle. The second compartment that we added was for the battery pack. Adding this battery pack allows us to use a bigger battery, and still fit everything within the container. The final thing that we made space for in the container is the cuff. Secondly, we reprinted the connector screw. While keeping the hole consistent throughout, we made the reel slits only halfway through. We kept the slits so that we can twist the screw, but we made part of it solid so that the user can not see the arduino and chords while in use.


Biometrics Process

This process began by deciding what sensors and devices we wanted to use in order to perform the most beneficial functions to the portable IV.  The first and most obvious function was a heating device due to the extremely cold temperatures on mountains that the user would be hiking in.  This heating device would be used to heat the IV to the optimal heat between 104 and 106 degrees Fahrenheit.  The idea of this heating device is that is using the heat that resistors generate in order to heat the IV drip to the optimal temperature.  This process began by simply hooking a 3.9 ohm resistor up to the Arduino and attaching the resistor up to the temperature sensor in order to read the heat that the resistor was giving off.  Initially there was not enough power to make the resistor heat up to the optimal heat.  Many alterations were then made over a span of three days.  The result was four resistors saudered in series hooked up to an 11 volt lithium polymer battery. This battery provided the correct amount of power in order to heat the resistors up to the correct temperature.  The four resistors could now be wrapped around the temperature sensor in order to insulate the increased heat.  This allowed for the temperature to increase faster.  The arduino was then programmed to cool down if the temperature exceeded 106 degrees and heat up if the temperature fell below 102 degrees the resistors would heat up again.  After this was successfully programmed the sketch was uploaded to an Arduino Micro, and the necessary wires were saudered into a perf board in order to minimize the size of the device in order for the device to fit into the piece.  After this was done, UV lights were attached in series and saudered together in order to fit into the holes in which they are meant to be placed within the piece.  However, the lights should have been attached in parallel rather than in series.  This issue was fixed and the lights worked.


Backcountry IV - Final

Devin Lewtan and 5 OthersMax Dadagian
Laurel Sullivan
Sydney Brown
Oliver Geller
Andrew Todd Marcus
1 / 14

Hypothermia is a serious danger to high altitude climbers. When a patient suffering from hypothermia is brought to a hospital for medical assistance, a doctor typically begins treating the patient by setting him or her up with a heated IV. Injecting warm saline solution into the body raises the patient’s core body temperature as well as hydrates and provides the patient with nutrients. This ultimately relieves hypothermia. A large problem is that often times those suffering from hypothermia do not have immediate access to medical assistance. We wanted to create a portable heated IV for extreme climate situations and/or high altitude climbers suffering from hypothermia or dehydration. This product is not supposed to heal a person completely, it is intended to be used as a temporary aid to prolong the user’s life until they can receive medical assistance.

The device purifies the water using a cap with built in UV lights. This "purifier" screws into a separate compartment containing ceramic resistors that heat the IV drip reservoir. After being purified and heated, the water flows through the IV tubing until it reaches the needle. The needle is intended to be clipped into the specialized cuff created. The cuff is an 3D printed semi-circle placed on a person's forearm. The cuff is designed to simplify and secure the injection of the IV needle into the person's vein. The other compartments of the cannister hold other necessary components including the salt tablet/packet, a vein finder (Infrared light device), etc.

The importance of the product is clear--it could be the defying factor of a high altitude climber's survival. Without the Portable Warm IV, a person could possibly die of hypothermia on the mountain but with the IV, the chance of his or her core body temperature warming enough to prolong the survival long enough to receive medical assistance is likely. There are no existing products that are capable of helping high altitude mountaineers let alone in extreme conditions return their body to a normal temperature. Since hypothermia is such a serious threat to the lives of mountaineers, it is crucial to have a device that would keep them alive at high altitudes and dangerously cold temperatures. The portable warm IV would bring the user fundamental and pragmatic medical attention immediately, making it a life-changing product... Literally.


Vida Bailey and 3 OthersRosa Weinberg
Esther Cohen
Adut Ayuel
1 / 21

The goal of this studio was to create a wearable tool to help future humans living in extreme conditions to survive and thrive. Our environment was steep mountainsides and we wanted to make something to help people climb up, move around easier, and grab onto things.

Iteration 1: Our first iteration was just a piece of cardboard that we cut out free hand with pieces sticking out. We got our inspiration from Dr. Octopus in the Spiderman series. It looked very spidery and was basically just a very rough idea of what we wanted to accomplish. 

Iteration 2: For our next iteration we made a corset shape around a manequin and attached legs to it through slots. This looked very interesting with the legs all spaced out and we really liked the basis of it. Obviously with this there were some attachment issues and we would have to work more on the range of motion and asthetic of it. 

Iteration 3: Next, we started thinking about different materials that the idea could be made out of. We expirimented with tubes on a miniature model and attached them to another piece of cardboard with holes in it and some hot glue. We decided to steer clear of the tubing idea for visual and assembly aspects. 

Iteration 4: Our next iteration was a belt on a miniature manequin with three legs coming of of it. Our idea was that the legs would be able to move up and down and there would be spikes on the end to help climb. This is the protorype that started to resemble our final the best.

Iteration 5: We then made a bigger version of the 4th iteration with hinges so that it was movable and attached to a belt. While the idea was strong the look of the design lacked asthetic so we decided to revamp it a little bit by adding some cutouts and extra things sticking out of it. Adut and I really liked the look of this and just thought it needed some more dynamics to it.

Iteration 6: We looked at some claw models and decided that the cutout idea was a good fit and we looked at some different shapes. We made these movable by separating them with a divider. We then decided on the triangle look and made it a little visually better. We then cut this out of wood with a claw piece on the end and really liked how it turned out. We just wanted to make the top part a little more interesting and the cutouts also. 

Iteration 7: Our final iteration took many little pieces strung around the belt spacing out the revamped top pieces. Some of these have legs coming off of them and the size gets bigger as it goes around the body. We had to play around with the number of little pieces many times ranging from 7 to 10. We decided on 10 and also played with a design with string going through the holes of the project. We didn't like how this worked so we decided to ditch that idea. 

Our final product will allow future people to live on steep mountains so they can climb up and down, lift heavy rocks and grab on to the mountainside.



Vida Bailey and 3 OthersRosa Weinberg
Adut Ayuel
Esther Cohen
1 / 6

The studio focused on creating wearables for a future when habitable land is scarce and humans have to live in harsh environments.  Our design was made for future humans that might be living on steep mountains. Humans are not naturally adapted to be comfortable in this environment so we made a wearable tool to help them be hands-free. We wanted to create a belt with legs attached to help the wearer climb a mountain more safely and easily and to be a fashionable accessory someone in the future would want to wear.

We got our inspiration from Doctor Octopus a legendary villain in the comic books, who has four arms attached to his back. Each of these four arms is capable of lifting several tons, provided that at least one arm is used to support his body. The reaction time and agility of his mechanical appendages are enhanced far beyond the range attainable for normal human musculature. The arms allow Octavius to move rapidly over any terrain and to scale vertical surfaces and ceilings.The four legged belt would go around your waist making it easy for one to hang on to high steep hills or just to reach things that are heavy and out of reach. We used a simple but wide black belt as a base for our design. We had 20 pieces attached to the belt, separated by spacers to serve as a structure for the legs to attach to. The four legs were evenly spaced, two on each side and the front and in the back. They were made up of two pieces which made them movable.  

This project was important because its always necessary to be thinking about and planning for the future. Although many have guesses no one knows for sure what it is going to be like. Especially with the climate changing because of global warming we have to start preparing for the future now. Although we may not live on steep mountains in 1,000 years this project is looking forward and could help future civilizations.  

Genius Camp

Andrew Todd Marcus
1 / 1

During the Genius Camp, students learn essential skills that they will use in their subsequent studios. 

  • NuVu Blog: Learn how to navigate and document projects for process and presentation
  • Photoshop and photography: Take a headshot and create a collage that incorporates elements from your life. 
  • Illustrator: Document, Diagram and present a Tool
  • Rhino and lasercutting: Design and build a mechanical creature.
  • Rhino and 3d printing: Design an iphone case and 3d print it.
  • Electronics: Learn basic electronics Theory
  • Programming: Learn Processing and complete a simple project

Requirements for Final Post

Rosa Weinberg and Andrew Todd Marcus
1 / 3

Your "Final Post" should only show the final images and diagrams of your final project. 

Images: See slideshow above explaining the images required for the final post

Text: The text should answer the following questions:

  • What is the main idea? This can be a 2-3 sentence "Elevator Speech"..
  • What is the design problem? What are you trying to solve?
  • Why is this project important?

Portfolio Instructions

Andrew Todd Marcus
1 / 1

Your final portfolio is composed of two posts in the Portfolio tab of your project. The post names should be Final and Process. The Process post should include your final images at the end.


  • Make sure to add each member of your team by clicking Ownership/Privacy on the gear next to the post and adding the members of the group AND change Privacy from Studio to Public . When you are finished, click SAVE
  • Process Post: includes everything including final images and diagrams 
  • Final Post: only final images and diagrams 


When your portfolio is complete, you can set the privacy for the Final and Process posts to PUBLIC. To do this, click Ownership/Privacy on the gear next to the post and change the Privacy to Public. When you are finished, click SAVE.