Installing Arduino

Keenan Gray

visit this link https://www.arduino.cc/en/main/software

Scroll down and select the proper version for the computer you use. 

Download and unzip the file - be sure to place the unzipped content somewhere on your computer you will remember - do not keep it in downloads or it may be lost/deleted accidentally.

Digital Presentation Slideshow: May 3, 2018

Steffany Williams

Sunrise, Sunsit incorporates the pleasure of watching a sunset or sunrise, sitting down while also providing an intricate aspect of shade. This permits park guests to enjoy the beautiful environment of LakeBonnet, mesmerized by the ecosystems and the kinetic machine that we replicated. The simple mechanism only requires a rotation of the bottom (large) gears, connected to the top (small) gears by a rope chain, revolving the dowel that withholds the panels.

Rain Remover Presentation

Alessandra Manganaro

The Rain Remover

Created by Alessandra Manganaro

1 / 16

Graphic Design Tips

Andrew Todd Marcus

Basic Electricity

Andrew Todd Marcus

Creating Your Studio Setup

Chris Perry

Creating Your Studio Setup

For this activity, you will be creating a space where you can work on your robot over the next two weeks. There are two parts to this activity:

Part 1: Space 

  1. To start off, you will need to find a space where you will be able to work, and to clear it off completely. Perhaps you have a desk or table that you can use, or maybe prefer to work on the floor. 
  2. Once you have staked your claim and cleared it off, you may want to clean it as well (either wipe it down, brush it off, etc.)
  3. Take a picture of your work surface to share with the studio 

Part 2: Materials

  1. In addition to the materials we have sent you, collect any other tools you may have or think that you might need.
  2. Organize those materials in your space, for how to organize, you can check out this video on Knolling
  3. Photograph the materials you have knolled to share with the studio

Part 3: Software 

  1. Please download Arduino an IDE for editing the code of your robot. Ensure that Arduino opens on your computer for the first day of class. [Additional Help on Installing]
  2. You will also need to be able to plug the included USB cable into your computer, if you are using a mac, you may need a usb to usb-c Adapter

Deliverable

Once you complete this activity, be sure to take at least  (2) photos of your work surface and knolled materials. We will go over how to post documentations into the Response tab when we meet as a studio.

Day 1

Keenan Gray

Creating Your Studio Setup

Chris Perry

Creating Your Studio Setup

For this activity, you will be creating a space where you can work on your robot over the next two weeks. There are two parts to this activity:

Part 1: Space 

  1. To start off, you will need to find a space where you will be able to work, and to clear it off completely. Perhaps you have a desk or table that you can use, or maybe prefer to work on the floor. 
  2. Once you have staked your claim and cleared it off, you may want to clean it as well (either wipe it down, brush it off, etc.)
  3. Take a picture of your work surface to share with the studio 

Part 2: Materials

  1. In addition to the materials we have sent you, collect any other tools you may have or think that you might need.
  2. Organize those materials in your space, for how to organize, you can check out this video on Knolling
  3. Photograph the materials you have knolled to share with the studio

Part 3: Software 

  1. Please download Arduino an IDE for editing the code of your robot. Ensure that Arduino opens on your computer for the first day of class. [Additional Help on Installing]
  2. You will also need to be able to plug the included USB cable into your computer, if you are using a mac, you may need a usb to usb-c Adapter

Deliverable

Once you complete this activity, be sure to take at least  (2) photos of your work surface and knolled materials. We will go over how to post documentations into the Response tab when we meet as a studio.

Nutopian Machines 2020

Jenny Kinard

Session 2: Jul 20-31, 2020

Have you ever had a cool idea for a machine that you wanted to make, but didn’t know how? Perhaps a robot that swats flies? Or a wizard machine that grants you wishes? In this studio, come with an idea or an issue, and you will invent the machine that solves problems for the future, or just does something really fun! And in ten short days, we’ll show you how!

In this studio, students will learn the basics of fabrication, electronics, microcontrollers, and computer programming. You will also learn how to integrate the computer with external sensors (from simple switches and buttons to heat/temperature, light, gas, touch) and actuators (such as motors, lights, speakers, solenoids, valves, fans) to allow them to turn their ideas into nutopian machines.

Register HERE!

Focus skills/subjects/technologies:

   Design

   Physics (electricity and magnetism)

   Engineering

   Programming

   Electronics

   Robotics (Arduino )    Sensors and Actuators

   Digital Fabrication (Laser-cutting, 3d Printing)

   3d Modeling

Register HERE!

Flapping Car

Sophie Lyon