Final portfolio post

Nothing to Something | Assignments
Promt

Final Post - Requirements for the Post

Andrew Todd Marcus

The Final Post:

This post showcases your final design through two parts:

  1. An Abstract that shows the final project a concise series of images and diagrams. Its purpose is to allow a viewer or visitor to understand the project in its entirety in a few brief minutes. It is mainly concerned with the What of your project but must contain an overview of the Why and your entire narrative arc. This part of your post will be used in your 2-3 minute NuVu community presentation and will likely be the portion reporters, colleges, and family will see first. 
  2. The Process which tells the comprehensive story of how your idea was born, developed, and manifested. The arc of the story should encompass the, How of your project in a compelling narrative. It showcases your design process including your brainstorming, each of your iterations, and your final prototype. It allows the viewer to delve deeply into your process. This post will be used in your review presentation at the end of the session. 

The title of this post must be The name of your project. 

Slides:

The Final post has 15-20 slides. Every slide MUST have a title. Captions are a good idea as well.

ABSTRACT PORTION
I this section you are showing the main concept and design of the project. The abstract is an overview meant to excite the viewer. You should not plan to describe the entire project in this section.

1. TITLE WITH TAGLINE (1 Slide): This slides shows a crisp, clear final image and the title of your project. with a pithy blurb describing the project. The image, name, and tagline should draw a viewer in. 

Examples:

  • The Fruit - A line following, light tracking robot
  • Segmented Vehicle - A vehicle that conforms to the landscape
  • Cacoon - Wearable sculpture exploring the concept of transformation and death

2. CONTEXT IMAGE: (1 slide) This is a single image that shows a clear precedent or evocative image. This image helps set up the why in a compelling way, sets the stage for your narrative, and will help frame the entire presentation. The caption of this slide (set with the Edit Captions button when editing your post) should be the text of the Thesis Statement/Problem & Solution. You will read these while presenting this slide. No Text on the slide.

3. THESIS STATEMENT / PROBLEM & SOLUTION SLIDE (1 Slide) : This is a TEXT ONLY slide for visitors to your portfolio. In consultation with your coach you will either create a Thesis Statement or state the Problem/Solution. You will skip past this slide in the presentation as you will have read the content in the Context Image.

Problem/Solution: This works best for a project with a clear problem that leads to a describable physical solution.

This slide answers the questions:

  • What is the problem I am trying to Solve? This is likely different for each project in a studio. Be clear and use the problem to set up the narrative for your presentation.
    • Example: The Problem: Design a vehicle for a mountainous world with difficult terrain to traverse.
  • How did I solve it?. This is your 1 sentence project description with an optional additional 1-2 sentences. 
    • Example: The Solution: A segmented vehicle with a universal joint system that handles mountainous terrain by conforming to the landscape.

Thesis: Thesis statements are appropriate for a conceptual project with a nuanced or complex generative narrative. Your thesis states the Why and How clearly and succinctly in 1-3 sentences.

  • Examples:
    • The Cocoon:  A wearable sculpture that explores the concept of transformations and death. The Cocoon explores the spiritual journey beyond the human experience; what it means to be human, how wonder effects us, and the concept of what happens after death.
    • Body Accordion: A musical prosthetic that translates the wearer’s body movements into a dynamic multimedia performance. The Body Accordion converts flex sensor input to sound through Arduino, MaxMSP, and Ableton Live. 
    • Seed to Soup Animation: A whimsical animation about the slow food movement. Seed to Soup showcases a holistic method of cooking. From garden, to kitchen, to dinner table.
    • Antlers: A wearable sculpture inspired by antlers found in the deer and antelope family. "Antlers" explores the comparison between armor and attraction. 

4. FUNCTIONAL DIAGRAM: A diagram showing some aspect of the functionality. These can include:

  • How one uses or interacts with the project
  • The overall behavior of the project over time
  • For a complex interactive project, this can be a clear diagram of the software behavior\

5. FINAL IMAGE: (3 slides) The last slides should have an image of the final project. These images should be taken in the photo booth, cropped, and adjusted for contrast, brightness, etc. You can also use an image In-Use. Consider using a GIF to show how the project works. You will NOT describe the whole project here, simply show the completed project before going onto the Process. 

PROCESS PORTION

6. PRECEDENT SLIDES (2 slides minimum, 3 slides maximum):  Precedents are any projects that inspired you creatively or gave you technical guidance. No Text.

  • 1 Slide - Conceptual Precedent
  • 1 Slide - Technical Precedent
  • 1 Slide - Additional Precedent

7. INITIAL SKETCHES/CONCEPT DIAGRAM (1 slide minimum, 2 slides maximum): These slides show your initial, generative ideas in sketch form. You can think of this as a sketch of the big idea, it is the chief organizing thought or decision behind the design presented in the form of a basic sketch or diagram. If you do not have a clear concept sketch it is fine to make one after the fact. These should clean, clear drawings. No Text.

8. ITERATIONS: (3 slides minimum, 5 slides maximum): The next part of the process post are the iterations you documented in your daily posts. Explain your design decisions and how your project changed at each step.

  • For build studios, choose 3-5 representative iterations of your project with 1 slides per iteration. The images should show clear, major design changes. 
  • For digital or graphics studios, have a slide for each important design decision. Generally it is best to avoid screen shots. These could include:
    • A storyboard slide
    • A slide with multiple images showing graphical character development.
    • Stylistic explorations

9. DIAGRAMS: (1 slides minimum) Diagrams of the final project.

Build studios will need at least 1-2 additional diagrams:

  • Construction Diagram:  A diagram offering insight on how the project is put together
    • Ideally, this will be an exploded axonometric
    • At minimum this can be a labeled disassembled photo  
  • Electronics Diagram: A circuit schematic showing project inputs, outputs, and architecture.

Digital studios should have a diagram of the storyboard and flow of the project.

10. ADDITIONAL FINAL IMAGES: (3 slides minimum, 5 slides maximum) Additional final images showing the culmination of your process. You should include:

  • 2-3 Images in the Booth. Make sure they are cropped, adjusted, and look great.
  • 1-2 Images in Use