Work from unit 2. Corrections/errors in red

In terms of the material for unit 1, most of it was understandable. However I did have some slight problems differentiating the acceleration and speed. As well as determining what velocity represented.

Used two vertical bar filters to mask two exposures against each other

Got some good photos today!

We got images!

We have developed images, only one of which seemed to contain an image of what could be a support beam. We are questioning what could cause the lack of image, whether it be light bleed, camera problems, or the fact that the film being used is over 35 years old. I also got a picture from my latest camera that showed minimal light leak at a 30 second exposure as well as a clean image of a uv flashlight. 

Images have been taken with a 26 second exposure. images haven't been developed.

Focal Point 2.8 in

Film Size 2 in

f stop 201

angle of view 53

pinhole size .36 mm

Day 4 I cut and assembled pinhole camera MK2, it was cloudy so the UV index was too low, A hole was cut in the side and a camera was inserted into the hole allowing for the viewing of light sources through the camera. It was also made evident that some sort of fabric is needed to help with light bleed

I developed pinhole camera MK2 and verified that the camera film was exposable by using control samples.