Follow these steps to reset your password on the NuVu website.

Resetting your password on the website is the same process as setting up your password for the first time. The post Logging in for the First Time covers this content, but it will be repeated below for ease of access. If you'd prefer to digest this information in Video form, please click the link mentioned above for a video. 

1. Go to your school's domain, such as https://cambridge.nuvustudio.com.
2. Go to the top right corner of the page and click on Login.
3. Click on Reset Password, enter your Email and click Send Password Reset Link.
4. Go to the email you entered in the previous step and look for an email from NuVu with the subject line: "NuVu Password Reset Instructions". Open up this email and click on the pink button titled: Reset your Password.
5. Follow the link from Reset your Password. Enter a new password once, and then again to confirm. Afterwards, click Update Password to finalize your new password. You'll be automatically logged in. 

Introduction

The Slide Editor is a powerful presentation creation software with a variety of tools. This guide serves as an introduction to all the tools available. Hovering over a tool will highlight it and show its name.

Move

Select Move to move content around. Select content then use the Move tool to change the location of content.

Hand Tool

Select Hand to move your view. Click once to select the tool and then click and drag to move your view around. 

Comment

Clicking comment brings up the comment menu. On the left hand side, a list of all comments in the current presentation will be displayed. Clicking anywhere on the slide editor will add a comment in that spot. Type your comment, then click post and it will be added to the slide and the comment menu. In the comment menu, you can reply to and delete comments.

Image

Selecting Image will bring up the image menu on the left side of the screen. Previously uploaded images will appear here. Click upload photos to add more pictures. Clicking an image will highlight it in pink. After selecting images, click the Insert Image button on the bottom of the screen to add your selected images. Multiple images can be inserted at the same time. The same is true for uploading images. For more information on all the options available in an image, see the Image Editor Options.

Camera

Select Camera to bring up the Camera menu on the left. Clicking on the option All in the top left will drop down a menu for sorting camera content. Choosing a date will refresh content. Clicking on an image will highlight it in pink. After selecting images, click the Insert Image button on the bottom of the screen to add your selected images. Multiple images can be inserted at the same time.

Video

Select Video to bring up the Video Menu on the left. Previously uploaded Videos will appear here. Click upload videos to add more videos. Clicking an image will highlight it in pink. After selecting videos, click the Insert Video button on the bottom of the screen to add your selected videos. Multiple videos can be inserted at the same time. The same is true for uploading videos.

Fetch

Select Fetch to bring up the Fetch Menu on the left. Previously fetched images will appear here. A gray box will appear, enter the URL to your image here and click Fetch. If the link is valid and readable, it will be imported and appear in your list of images below. Some tips for getting valid links: After googling an image, or finding it on a webpage, Right-Click it. Select: Open in a New Tab. Copy and paste the URL from your new tab to the gray box and fetch it. 

Embed

Videos (Youtube, Vimeo) or links to interactive web-based content (Google Slides, etc.) can be added from this tab. This includes PDFs that are hosted elsewhere on the web or cloud. 

In order for files hosted on a cloud-based service (Google Drive, etc.) to be embedded on the Platform, set the viewing permissions of that file to be anyone with the link or public.

Paste the link to the content in the Gray box, and click Embed. If your link is valid, your embed will appear. If it is not valid, the editor will tell you in pink text below the Gray Box. 

Clicking on an embed will highlight it in pink. Clicking the insert item button will add the embed to the current slide. Multiple embeds may be added at the same time. 

Text

Clicking Text will add a new textbox to the current slide. For more information on all the options available in a textbox, see the Text Editor section. 

Shapes

Clicking Shapes will add a new shape object to the current slide. For more information on all the options available in a shape object, see the Shape Editor section.

Line

Clicking Line will create a new line object. Select either side (highlighted with a blue circle) to move the ends of the line. 

The Line tool has a few options, many of which are highlighted above in the Image, Shape and Text Editor tutorials. The unique options are as follows:

Start: Select the solid white line next to Start. Changing this value will change the look of one end of the line.

End: Select the solid white line next to End. Changing this value will change the look of the other end of the line.

Style: Select the solid white line next to Style. Changing this value will change the look in between each end of the line.

Thickness: Click on the number associated with px. Typing in a new value will update the thickness of the line.

Template

Select the Template button to show all available templates. Clicking on a template will open up all available slides in that template. Clicking on a slide in a template will highlight it in pink. Clicking Insert Template after selecting slide(s) will add those slides to the current presentation.

Tip: Creators of templates can select a gear in the top right corner of a template in the Gallery Templates view to delete templates

Tip: See the Template Guide to learn more about creating templates and other features. 

Background Color

Select the Background Color to pull up the color menu on the left side. By selecting one of the preset values or by typing in a new #Hex Code value, the background color of the slide will update. 

Zoom In/Out

These two buttons will zoom in and zoom out the current slide. Each will update the view in increments of 20%. As well as these two buttons, in the top right corner of the editor there are options to more finely tune the zoom. Select the 100% (in the photo to the right) to bring down the menu. Typing in the white text box will update the zoom to an exact value. Click any 5 of the lower options to update the zoom. Zooming In, Out, to 50%, to 100% or to 200%.  

Present

Click Present to enter the presentation view directly from the editor.

Undo/Redo

Clicking either undo or redo button will scroll the user back in the editing timeline. Useful for when mistakes are made and users want to go back.

New Slide

Select New Slide to add a new slide to the presentation. Clicking this button will move your current slide to the new slide. 

Visibility

The visibility button will set the current slide to visible/invisible. This will hide the slide when the presentation view is entered. 

Slide View Options

The last two buttons will change the view layout of the slides. The three rectangle button is the default view, with slide previews being on the bottom of the slide editor. Selecting the button below it will expand the slide preview view, occupying the entire screen, allowing you to quickly move between a presentation with many slides. Select the previously mentioned button again to change the view back. 

Introduction

When a post is ready to be published, there are some final settings to consider at the bottom of the Create A Post view.

Privacy

When you publish a post, you have options for who will see the post. The default setting is usually School.

Project: Students explicitly listed as members of that Project.

Studio: Any student enrolled in your Studio.

School: Any student enrolled in the School.

Public: Visible to anyone who visits the link, no login required.

Comments

You can allow or disallow Comments on your posts by clicking the radio button. Any students enrolled in your Studio, along with Faculty and Staff, will be able to comment on a post. The default setting is Allow.

Notify Participants

Checking this radio button sends an email alert to everyone in the Studio or everyone in the Project, depending on where the post is located. 

Publish

At the bottom of the Create a Post window, you have three options:

Cancel

Cancels your draft post. No work is saved or preserved.

Save

Saves your post as a Draft. This Draft is only visible to you. If you add a collaborator to a draft post, they will be able to see it as well.

Posts that have been Saved as drafts appear only as a black title - no body of the post will be visible. Saved posts may also appear as Untitled Post in grey, if you did not title the post before Saving. Click the gear icon next to the title to edit this post or Publish.

Publish 

Publishes your post to the site. Post is visible to the user group defined under the Privacy setting. 

Refer to our Video Tutorials to learn more. Introduction to Creating Posts.

Introduction

When a post is ready to be published, there are some final settings to consider at the bottom of the Create A Post view.

Privacy

When you publish a post, you have options for who will see the post. The default setting is usually School.

Project: Students explicitly listed as members of that Project.

Studio: Any student enrolled in your Studio.

School: Any student enrolled in the School.

Public: Visible to anyone who visits the link, no login required.

Comments

You can allow or disallow Comments on your posts by clicking the radio button. Any students enrolled in your Studio, along with Faculty and Staff, will be able to comment on a post. The default setting is Allow.

Notify Participants

Checking this radio button sends an email alert to everyone in the Studio or everyone in the Project, depending on where the post is located. 

Publish

At the bottom of the Create a Post window, you have three options:

Cancel

Cancels your draft post. No work is saved or preserved.

Save

Saves your post as a Draft. This Draft is only visible to you. If you add a collaborator to a draft post, they will be able to see it as well.

Posts that have been Saved as drafts appear only as a black title - no body of the post will be visible. Saved posts may also appear as Untitled Post in grey, if you did not title the post before Saving. Click the gear icon next to the title to edit this post or Publish.

Publish 

Publishes your post to the site. Post is visible to the user group defined under the Privacy setting. 

Refer to our Video Tutorials to learn more. Introduction to Creating Posts.

Introduction

Modifications to an existing Saved or Published post can be made by clicking the gear icon at the top right of the post. If no gear icon is visible, you do not have permissions to edit the post. 

Edit Post

You can edit a Saved or Published post by clicking on the gear icon and selecting Edit Post.

Delete Post

Deletes selected post from the site. If copies of the post exist elsewhere on the platform, they will be preserved.

Copy Post

You can copy this post to any location on the site where you have permission to create content. 

Click the Paste button (to the right of the Create a Post prompt bar) in the tab where you would like to place the copied post.

Collaborators

You can add Student collaborators to any post that you make. Adding another user as a collaborator means that they will be able to edit the post, and that the post will appear on their User Profile page. 

Note that only one user can edit a post at a time. Coordinate with your collaborators to ensure that you are not attempting to edit a post at the same time. 

Additional Info

If your post includes a presentation, a few more options are available.

Edit Presentation

Clicking Edit Presentation will take you directly to the slide editor. 

Export Presentation

Clicking Export Presentation will start a download for the selected presentation on your computer. Each slide will be exported into its own JPEG file with an encompassing folder for all the slides. 

Delete Presentation

Clicking Delete Presentation will delete the currently selected presentation. This is a permanent action and should be used sparingly. 

Toggle Header

Clicking Toggle Header will change the formatting at the top of a presentation. With a Header on, information such as: Profile Picture, Name, Date and Privacy settings are shown at the top of a presentation. With a Header off, all information shown with the header on will be hidden. The only information shown will be the name of the post.

Introduction

Modifications to an existing Saved or Published post can be made by clicking the gear icon at the top right of the post. If no gear icon is visible, you do not have permissions to edit the post. 

Edit Post

You can edit a Saved or Published post by clicking on the gear icon and selecting Edit Post.

Delete Post

Deletes selected post from the site. If copies of the post exist elsewhere on the platform, they will be preserved.

Copy Post

You can copy this post to any location on the site where you have permission to create content. 

Click the Paste button (to the right of the Create a Post prompt bar) in the tab where you would like to place the copied post.

Collaborators

You can add Student collaborators to any post that you make. Adding another user as a collaborator means that they will be able to edit the post, and that the post will appear on their User Profile page. 

Note that only one user can edit a post at a time. Coordinate with your collaborators to ensure that you are not attempting to edit a post at the same time. 

Additional Info

If your post includes a presentation, a few more options are available.

Edit Presentation

Clicking Edit Presentation will take you directly to the slide editor. 

Export Presentation

Clicking Export Presentation will start a download for the selected presentation on your computer. Each slide will be exported into its own JPEG file with an encompassing folder for all the slides. 

Delete Presentation

Clicking Delete Presentation will delete the currently selected presentation. This is a permanent action and should be used sparingly. 

Toggle Header

Clicking Toggle Header will change the formatting at the top of a presentation. With a Header on, information such as: Profile Picture, Name, Date and Privacy settings are shown at the top of a presentation. With a Header off, all information shown with the header on will be hidden. The only information shown will be the name of the post.