I will make a museum kind of thing with 3 dioramas.

This would relate to my book because the dioramas will show very important scenes is the book

Precedents



This is somebody using the laser cutter for a dice. I need to use the laser cutter to make the boxes of my dioramas.

This is a diorama made out of cardboard

Initial sketch

Progress

Day one

I finished my sketch and I am going to make a museum thing with 3 dioramas and a few important items

Day two

I laser cut this box for my first diorama

Day 3

I worked on my first piece and finished the painting and the trees I am going to do the dragon and the human print next

Day four

I finshed the painting

In day five I made a tinkercad file to 3d print but it didn't work out very well because the dragon was too complicated

Day 6

Because the 3d print won't work after a long time of waiting and finishing up other things, I decided to use the laser cutter to cut out the dragon and the main character. I also painted the top of the diorama. I did the second box for my 2nd diorama. It is going to need some clay. So I either ask Ms Walrod for it or I ask my mom to buy me some. I also might just only have 2 dioramas. If I have extra time, I will make some important objects. I also might need a base for my entire piece which will just be 2 pieces of the wood from the laser cutter.

On day seven I found the base for my project. It was just a big piece of cardboard. I also laser cutter my second piece out so that I could start using my model magic. The cut was pretty big and it didn't finish when the class ended. Thus, I do not have a picture of it. drew this picture to show how I am doing.

diorama one

Plan for where Diorama Two will be at.

In day Eight I tried to make an LED to help my magical thingy. It didn't work because it was Arduino or something. So I learned to Sauter for the tiny non-Arduino build. After it was done, It was too short for my project.

FINISHED