After tweaking and tinkering, we finally made something presentable. We created a working trigger and put it inside of the gun, which was make from laser cut sheets of plywood. The final product looked and worked very similarly to a crossbow, with a T-shaped piece of wood at the front of the gun running perpendicularly to the rest. In place of a rubber band, we used super-durable vulcanized rubber surgical tubing, cutting it down to appropriate sizing. Two pieces of electrical tape were placed in the middle of the piece of rubber, indicating where the plane was to be fired from. Luckily for us, the Stratos Glider came with a hook to allow it to be shot from a rubber band, so we did not have to change that design at all. The launcher was, at this point, practically finished.
We went out in the hallway to test our masterpiece and quickly noticed a couple things that needed to be changed. The electrical tape was off-center, causing the plane to be fired in inconsistent directions. A piece of the trigger was sticking out too much, and the plane's wing would collide with it every time. These problems, thankfully were easily fixed, and we had a working launcher by the final day of the Toy Studio. I'm really proud of Brian, Eli and Javier for working hard and producing a very cool toy.