Photo Joe

Calli Bilchik and Rowan Roudebush

Unravelling Tutu

Aidan Geary

OPENING DOORS video

Amro Arida

The Door Bot

Christopher Kitchen
1 / 19

A small attachment for your door that fully automates it for wheelchair accessibility. It uses a string to unlatch the handle and rolls the door open with a wheel.

 

For people with disabilities, it can be difficult if not impossible to leave the house on your own for many reasons. In the case of our client, Lee has quadriplegic cerebral palsy and therefore, can't open a door on his own. I decided to solve this by automating his door.  While there are obviously forms of automation for doors that have existed for a long time, there aren't really any home alternatives. Most of the automatic doors you see are bulky metal bars at the top of a door, impersonal, tacky, non-domestic, and overpriced. I decided to create a small, affordable, and easy to install automation for Lee's home. The design is a small box you slide under your door with a wheel on the floor, and a string sticking out the top attached to the door handle. When installing, all you have to do is slide the box under, tie the string around your door handle, and once you plug it in your done!

Armour

Rachel Siegel and 2 OthersWill Brown
Alexander Jin

Our studio is a workshop in which we construct wearables for dancers in the exhibit, On Display. On Display is trying to change people's ideas of beauty, by using dancers with disabilities. It gives the audience a chance to disregard society's obsession with body image. My group is creating a wearable for Heidi Latsky, the head of On Display. Heidi does not have disability, however she feels very vulnerable about her image, and age. We decided that this feeling of vulnerability is something we could represent in a wearable very well.

Our project is a necklace, with many detachable pieces of armor connected to it. Throughout the show, Heidi will slowly take off the pieces of armor until only the necklace is left. This is meant to represent her getting over her vulnerability. Heidi performs a very serious and physical dance nearing the end of the show, and doing it with the armor attached would be very restrictive. This is another reason for why we decided it would be important for her armor to be stripped fully off at some point. Heidi wants everything to be white during her shows. This became an obstacle we had to overcome because it limited us to a very minimal amount of materials, however we were very lucky because Acrylic, the material we knew we wanted to use, came in white. Most of our project is created out of this white acrylic. The triangle pieces that the necklace is primarily made out of is white acrylic, as well as the plates of armor. Our wearable is a very meaningful piece of art. We hope this project can encourage people watching to let themselves show their true form, and not let themselves feel self conscious about who they are.

Tiffany

Madeline Tallarico and 2 OthersChris Preller
Evy Dibble

The Armomat

Benjamin Campbell and NuVu User

Our project is a mobile prosthetic that stimulates contralateral movement in the arms, training the forearms to mimic the natural human gait. 

The Armomat is a portable prosthetic which forces one arm to move back when the other is pushed forward, and vice versa. We created this project for a person named Joe, who suffered a traumatic brain injury when he was 18 years old, and has very little control over his right arm. He told us that he had trouble maintaining his balance when walking due to the fact that his left arm does not perform the natural human gait.  Because he cannot control it, Joe has to hold his weak arm with the arm he has control over, and we wanted to create something that would assist him. After two very work intensive weeks, my partner and I created several different iterations of methods that would help Joe walk normally, and after encountering countless issues, we created the Armomat.

Button

Graham Galts and 2 OthersLily Harkins
Sam Tull
1 / 20

Fishing Rod

Ryan Dorian and Joseph Cybul

A casting device that attaches to a wheelchair and helps people with low motor skills to cast again.

We created a device that will help people fish again, this device will attach to a wheel chair and with simple motions will allow people to cast. The main consumer of our product will be people who loved to fish and for medical reasons cant do it any more. One of the things most disable people want to do, is to become as autonomous as they can get, and with this project we are trying to make fishing a activity they can do by them selves.

To make this project possible we design a compact model/base that we later on laser cut our of wood, this piece will essentially have an elevated structure on the far ends with a whole in the top where we glued a ball bearing, trough that bearing an aluminum rod will spin, after that we 3D printed a piece that has space for the aluminum rod to go thought and set screw holes to fix it in to rod, and on the Y axis we have a cylindrical piece that holds the fishing rod. on each side of the joint piece we have a piece that also has space for the rod to go trough but this time they have an other rod that goes up and attaches to a piece that releases the line when we need to, and on the other side those pieces have springs to be able to push that button that releases the line and also to push the rod and make the casting motion, for this project we mainly used 3D printed parts and laser cut pieces.

Magic: The Gathering

Ryan Dorian and 2 OthersMatthew Rosenblum
Julian Slama